Kingston 8gb (1x8gb) Ddr4 Udimm 2666mhz Cl19 1.2v Unbuffered Valueram Sing KVR26N19S6/8

Manufacture # Kingston | Model # KVR26N19S6/8

This document describes ValueRAM's KVR26N19S6/8 is a 1G x 64-bit (4GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx16, memory module, based on four 1G x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers.

Features:

• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Low-power auto self refresh (LPASR)
• Kingston 8gb KVR26N19S6/8 Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• On-board I2 serial presence-detect (SPD) EEPROM
• 8 internal banks 2 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF)
• Terminated control command and address bus
• RoHS Compliant and Halogen-Free

Overview:

• Capacity: 8GB DDR4 Non-ECC DIMM
• Module Type: DIMM
• Type/Error Check: Non-ECC
• Memory Form Factor: DDR4 1.2v
• Memory Speed: 2666MHz (PC4-21300)
• CAS Latency (CL): CL19

Manufacturer Warranty: Lifetime Warranty