Kingston 16gb (1x16gb) Ddr4 Sodimm 2666mhz Cl19 1.2v Single Ranked 1rx8 Va KVR26S19S8/16

Manufacture # Kingston | Model # KVR26S19S8/16

This document describes ValueRAM's KVR26S19S8/16 is a 2G x 64-bit (16GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, non-ECC, memory module, based on eight 2G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. This 260-pin DIMM uses gold contact fingers

Features:

• Nominal and dynamic on-die termination (ODT) for data, strobe, and mask signals
• Kingston KVR26S19S8/16 Low-power auto self refresh (LPASR)
• Data bus inversion (DBI) for data bus
• On-die VREFDQ generation and calibration
• On-board I2 serial presence-detect (SPD) EEPROM
• 16 internal banks; 4 groups of 4 banks each
• Fixed burst chop (BC) of 4 and burst length (BL) of 8 via the mode register set (MRS)
• Selectable BC4 or BL8 on-the-fly (OTF) Fly-by topology
• Terminated control command and address bus.

Overview:

• Capacity: 16GB DDR4 Non-ECC SODIMM
• Module Type: SODIMM
• Type/Error Check: Non-ECC
• Memory Form Factor: DDR4 1.2v
• Memory Speed: 2666MHz (PC4-21300)
• CAS Latency (CL): CL19
• Memory Rank: 1R (Single Rank) x8

Manufacturer Warranty: Lifetime Warranty