| Brightness |
12,500 lm (Center)*1 / 12,000 lm*2 |
| Technology |
Laser 1-chip DLP |
| DLP chip | Panel size (mm) |
17.0 mm diagonal (16:10 aspect ratio) |
| DLP chip | Panel size (inch) |
0.67 inch diagonal (16:10 aspect ratio) |
| DLP Chip | Display Method |
DLP chip x 1, DLP projection system |
| DLP Chip | Pixels |
2,304,000 (1920 x 1200) pixels |
| Lens |
Powered zoom (throw ratio 1.7-2.4:1), powered focus F 1.7-1.9, f 25.6-35.7 mm |
| Light Source |
Laser diodes laser Class 1 (Class 3R for US models) |
| Screen size (diagonal) (mm) |
1.27-15.24 m, 1.27-5.08 m with ET-DLE055, 2.54-8.89 m with ET-DLE035, 16:10 aspect ratio |
| Screen size (diagonal) (inch) |
50-600 inch, 50-200 inch with ET-DLE055, 100-350 inch with ET-DLE035, 16:10 aspect ratio |
| Brightness*1 |
12,500 lm (Center)*1 / 12,000 lm*2 |
| Center-to-Corner Uniformity*1 |
0.9 |
| Contrast*1 |
10,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) |
| Resolution |
1920 x 1200 pixels |
| Optical axis shift*2 | Vertical (from center of screen) |
+50 %, -16 % (+40%, -16% with ET-DLE060) (powered) |
| Optical axis shift*5 | Horizontal (from center of screen) |
+30 %, -10 % (+19%, -10% with ET-DLE060 / +28 %, -10 % with ET-DLE085) (powered) |
| Keystone Correction Range |
Vertical: ±40° (±16° with ET-DLE060, ±22° with ET-DLE085/DLE055, +5° with ET-DLE035),
Horizontal: ±15° (±10° with ET-DLE060) (cannot be operated with ET-DLE035) |
| Keystone correction range with optional Upgrade Kit ET-UK20 |
Vertical: ±45° (±16° with ET-DLE060, ±40° with ET-DLE150/DLE250 / supplied lens, ±22° with ET-DLE085/DLE055),
Horizontal: ±40° (±10° with ET-DLE060, ±15° with ET-DLE085/DLE055), When vertical and horizontal keystone are used simultaneously, correction cannot be made exceeding total of 55°. |
| Installation |
Ceiling/floor, front/rear, free 360-degree installation |
| Terminals | SDI In |
BNC x 1: 3G/HD/SD-SDI input |
| Terminals | HDMI In |
HDMI 19-pin x 1 (Deep Color, compatible with HDCP) |
| Terminals | DVI-D In |
DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only) |
| Terminals | RGB 1 In |
RGB x 1 (BNC x 5): RGB/YPBPR/YCBCR |
| Terminals | RGB 2 In |
D-sub HD 15-pin (female) x 1: RGB/YPBPR/YCBCR |
| Terminals | Serial In |
D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| Terminals | Serial Out |
D-sub 9-pin (male) x 1 for link control |
| Terminals | REMOTE 1 IN |
M3 x 1 for wired remote control |
| Terminals | REMOTE 1 OUT |
M3 x 1 for link control (for wired remote control) |
| Terminals | Remote 2 In |
D-sub 9-pin (female) x 1 for external control (parallel) |
| Terminals | LAN |
RJ-45 x 1 for network connection, 10Base-T, 100Base-TX, compatible with PJLink |
| Terminals | DIGITAL LINK |
RJ-45 x 1 for network and DIGITAL LINK connection, 100Base-TX, compatible with PJLink (Class 2), HDCP, Deep Color |
| Power Supply |
AC 100-240 V, 50/60 Hz |
| Power Consumption |
1,275W (TBD) |
| Operating noise*3 |
46 dB (TBD) |
| Cabinet Materials |
Molded plastic |
| Dimensions (W x H x D) (mm) |
498 x 200*4 x 581 mm (with supplied lens) |
| Dimensions (W x H x D) (inch) |
19 19/32 inch x 7 7/8 inch *3 x 22 7/8 inch (with supplied lens) |
| Weight (kg)*6 |
Approximately 25.2 kg (with supplied lens) (TBD) |
| Weight (lbs.)*6 |
Approximately 55.6 lbs (with supplied lens) (TBD) |
| Operating environment (?/M) |
Operating temperature: 0-45 °C *5, operating humidity: 10-80 % (no condensation) |
| Operating environment (°F/Feet) |
Operating temperature: 32-113 °F *5, operating humidity: 10-80 % (no condensation) |
| Applicable software/application |
Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro, Smart Projector Control for iOS/Android |
| Note |
Note: offers the same performance as but comes without a lens.
*1 Luminance measured at center of screen.
*2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.
*3 Lens shift is not supported on the ET-DLE055, and the optical axis is fixed with the ET-DLE035.
*4 With legs at shortest position.
*5 The light output may be reduced to protect the projector depemding on the temperature or altitude of operational environment.
*6 Average value. May differ depending on the actual unit. |
0
