Eaton 10a Series Filter Iec 10a Input/output PSF10I

Brand : EATON

SKU : PSF10I

Availablity : Pre Order

Description
Specifications

Product Description

Manufacture # Eaton | Model # PSF10I

The Eaton 10 Amp Surge Protector / Inline Power Filter PSF10I is a 3-stage protection surge protector utilising high kA primary and secondary MOV protection in conjunction with an L/C filter. In addition, the PSFi also provides filtering of line harmonics and high-frequency noise with a cut-off frequency of ~10kHz and a nominal attenuation of 40dB. The PSFi series is designed to provide secondary protection against power surges caused by external sources such as lightning strikes and electrical switching as well as providing a measure of protection from surge events generated on the secondary side of the filter. The PSFi has been designed in accordance with AS3100, AS1768, IEC61643-11, IEC61000-6-1, 2, 3, 4 and other standards and codes as applicable.

Features:

Surge suppression & filtering in a single package
A PSF10I Small footprint
Enclosed PSF10I in IP 24 painted metal housing
Surge suppression rating of 20kA (L-N)
Protection Fail Indicators
3 mode, 3 Stage Protection

Overview:

Product Type: Surge Protector
Form Factor: Portable
Input Voltage: 200 - 250 Volt
Protection modes: Line-Neutral, Line-Earth, Neutral-Earth
Filter attenuation: 40dB nominal above 1MHz

Manufacturer Warranty: 01 Years Limited Warranty

Technical Specifications

Location Category	Indoor
Dimensions - Including hinges (H x W x D, mm)	50 x 155 x 150
Weight (g)	500
Warranty	12 months
Input voltage (Uc)	200-250VAC 1 Phase
Max Continuous Voltage (Mcov)	285VAC L-N
Number of ports	2 Port
Method of mounting	Portable
Service type	TT, TN, TN C-S or any 1 phase system with a grounded neutral. This unit must not be connected to an ungrounded system.
Temporary overvoltage - TOV	300VAC L-N, 15 mins
Test Classification	Class II
Energy Absorption rating - per mode (joules)	Primary Protection L-N = 370J Primary Common Mode protection L-E & N-E = 480J Secondary protection L-N = 225J Secondary Common Mode protection L-E & N-E = 480J Aggregate rating = 1,555J
Current rating - continuous	10A
Test Classification	Class III (IEC 61643-1), Category A (ANSI/IEEE C62.41)
Recommended max. overcurrent protection	10A
Residual current	<0.5 mA
Protection modes	Line-Neutral, Line-Earth, Neutral-Earth
In 8/20us (Line-Neutral) Nominal surge life	10kA x 20 hits
In 8/20us (Line-Earth) Nominal surge life	3kA x 20 hits
In 8/20us (Neutral-Earth) Nominal surge life	3kA x 20 hits
Ismax 8/20us (Line-Neutral) Max surge level	20kA
Ismax 8/20us (Line-Earth) Max surge level	10kA
Ismax 8/20us (Neutral-Earth) Max surge level	10kA
Filter attenuation	40dB nominal above 1MHz
Initial clamp voltage (Line-Neutral)	560V
Initial clamp voltage (Line-Earth)	680V
Initial clamp voltage (Neutral-Earth)	680V
Residual voltage (Vpl) (Line-Neutral) (Let through voltage)	<1100 (3kA, 8/20uS)
Residual voltage (Vpl) (Line-Earth) (Let through voltage)	<1400 (3kA, 8/20uS)
Residual voltage (Vpl) (Neutral-Earth) (Let through voltage)	<1400 (3kA, 8/20uS)
Internal protection (fusing)	Thermal fusing on primary line-connected MOVs
Terminations	IEC 320-C14 10A input x 1, , IEC 320-C13 10A output x 1
Alarms/indicators	Includes status indicators, dry contact alarm relay output (normally-closed with power applied and all SPD’s at 100% capacity). Contact rating 250Vac/32Vdc, 5A, alarm under-voltage cut off 180Vac.
Enclosure rating	IP42
Standards. Designed in accordance with :	IEC61643-1:2005, IEC610006-1,2,3,4 ANSI/IEEE C62.41, AS/NZS1768, AS/NZS3000:2007, AS3100
Environment	-10 to 65°C, 10 to 90%RH (non-condensing)