Sku: PSCM2000
Brand: PowerShield
Category: UPS
Availability: In Stock
Ships in 1-2 days.
Pickup from Seven Hills in 1-2 days.
Shipping Calculator
Find
We Accept
Manufacture # PowerShield | Model # PSCM2000
The PowerShield Commander is a sophisticated pure sine wave, line interactive UPS. Besides providing Automatic Voltage Regulation (AVR) it also provides for a Pure Sine Wave output while in backup mode.This UPS is a cost effective solution for protecting applications such as networking, telecom, security and motors to name a few
Features:
Overview:
Manufacturer Warranty: 02 Years Limited Warranty
| Capacity | 2000 VA / 1800 W |
| Input :- | |
| Nominal Voltage | 240VAC |
| Acceptable Voltage Range | 162–290 VAC |
| Frequency Range | 50/60Hz ± 5Hz (auto sensing) |
| Output :- | |
| Voltage Regulation (AC Mode) | 240VAC (Selectable 208/220/230VAC) ± 10% AVR |
| Voltage Regulation (Batt. Mode) | ± 1.5% (before battery alarm) |
| Frequency Range (Batt. Mode) | 50 Hz or 60 Hz ± 1 Hz |
| Current Crest Ratio | 3:1 |
| Total Harmonic Distortion | 2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm) |
| Transfer Time | 6ms (Typical), 10ms max. |
| Waveform (Batt. Mode) | Pure Sine Wave |
| IEC Outlets | 10A, C13 x 3 |
| Australian Sockets | 2 |
| Efficiency :- | |
| AC Mode | 98% (Advanced ECO design) |
| Battery Mode | 91% |
| Battery :- | |
| Battery Type & Number | 12V / 9AH (x4) 12V / 9AH (x4) |
| Recharge Time | 4 hours recover to 90% capacity |
| Protection :- | |
| Full Protection | Overload, thermal, short circuit, discharge and overcharge protection |
| Surge Protection | 1968 Joules / 39000 Amps |
| Communications & Management :- | |
| Interface | USB and RS-232 as standard, Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact |
| Software | PowerShield NetGuard software - supports Windows based operating system, Linux, Unix and Mac |
| HID | Supports Windows, Apple, Linux, NAS and various industrial controllers |
| LCD Display/Alarm | AC mode, Batt. Mode, Load Level, Input Voltage, Output Voltage, Overload, Fault, Battery Replacement, Low Batt., Batt. Time Remaining |
| Audible Alarm | Battery Mode, Low Battery (Batt. Mode), Battery Replacement, Fault, Overload |
| Environment :- | |
| Operation Temperature | 0–40°C |
| Relative Humidity | 0–90% (RH non-condensing) |
| Noise Level | < 45dB |
| Physical :- | |
| Dimension L x W x H (mm) | 455 x 145 x 220 |
| Weight | 20.5 Kg |
Add Your Review