Kingston 2gb 1600mhz Ddr3 Non-ecc Cl11 Dimm Singl ( Kvr16n11s6/2 )

Manufacture # Kingston | Model # KVR16N11S6/2

ValueRAM's 256M x 64-bit (2GB) DDR3-1600 CL11 SDRAM (Synchronous DRAM) 1Rx16, memory module, based on four 256M x 16-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR3-1600 timing of 11-11-11 at 1.5V. This 240-pin DIMM uses gold contact fingers.

Features:

• Kingston Non-ecc Cl11 Dimm Singl (KVR16N11S6/2)
• JEDEC standard 1.5V (1.425V ~1.575V) Power Supply
• VDDQ = 1.5V (1.425V ~ 1.575V)
• 800MHz fCK for 1600Mb/sec/pin
• 8 independent internal bank
• Programmable CAS Latency: 11, 10, 9, 8, 7, 6
• Programmable Additive Latency: 0, CL - 2, or CL - 1 clock
• 8-bit pre-fetch
• Average Refresh Period 7.8us at lower than TCASE 85°C, 3.9us at 85°C < TCASE < 95°C
• Asynchronous Reset
• PCB Height 1.180” (30.00mm), single sided component

Overview:

• Capacity: 2GB
• Type: 240-Pin DDR3 SDRAM
• Speed: DDR3 1600 (PC3 12800)
• CAS Latency: 11
• Voltage: 1.50V
   

Manufacturer Warranty: Lifetime Warranty