Gigabyte M30 1TB NVMe M.2 Solid State Drive

SKU : GP-GM301TB-G
Brand : Gigabyte
This product is either discontinued or we cannot get that from suppliers.
Gigabyte GP-GM301TB-G, Interface PCIe 3.0x4, NVMe 1.3, FF M.2 2280, Capacity 1TB, TBW 650TB, NAND 3D TLC NAND Flash, External DDR Cache DDR3L 2Gb, Sequential Speeds (Up to) Read 3500MB/s/Write 3000MB/s, Random IOPS Speeds (Up to) Read 308K/Write 332K, MTBF 2 million hours, Power Consumption: Active Average R: 5.9W, W:5W, Idle L0/L0s/L1 900mw, L1.2 < 3mw.   The high-quality controller and flash, GIGABYTE M30 SSD can reach up to 3500 MB/sec sequential read, and up to 3000 MB/s sequential writes. Moreover, it comes with the DDR3L DRAM, SLC Cache, and advanced LDPC error correction to enhance
Ask a question about this product
Call Us

Estimated Shipping

Pay what you see.

No surcharge On Credit Card, AMEX or Paypal. American express, master card, nab, Paypal, visa

Share

  • Description
  • Specifications
  • Reviews

Product Description

Manufacture # GIGABYTE | Model # GP-GM301TB-G

 

The high-quality controller and flash, GIGABYTE M30 SSD can reach up to 3500 MB/sec sequential read, and up to 3000 MB/s sequential writes. Moreover, it comes with the DDR3L DRAM, SLC Cache, and advanced LDPC error correction to enhance the performance. It’s an ideal choice for gamers, PC enthusiasts, and content creators.

 

Features:

  • GIGABYTE M30 SSD delivers outstanding performance up to 3500 MB/sec sequential read, and up to 3000 MB/s sequential write
  • Equipped with a robust combination of controller and 3D NAND, M30 is up to 6 times faster than SATA III Solid State Drives and reach the limit of PCIe Gen3x4
  • Under a high-stress workload, most SSD controllers can peak over 70°C. In this situation, the drives will start slowing down to avert itself from failing
  • The hotter your SSD runs, the quicker it wears out the flash inside of the drive. GIGABYTE M30 SSD applied with 2 oz copper PCB design, which helps dissipate heat and prevent throttlin
  • Higher working temperature may cause data loss. The degradation factor of data loss could be a hundred times higher
  • With 2 oz coppetr PCB, GIGABYTE M30 SSD can operate at lower working temperatures to improve data storage reliability
  • Furthermore, SSDs can running at extreme performance longer
  • GIGABYTE M30 SSD not only offers incredible performance but also handles heavy workloads without overheating
  • Thanks to the improved efficiency thermal solution by using 2 oz copper PCB, GIGABYTE M30 SSD decrease 16% working temperatures compare with regular SSD without a heatsink
  • GIGABYTE M30 SSD is equipped with high speed DDR3L DRAM cache and does not need to reserve over-provisioning space, thus improving the random Read/Write performance
  • he newly updated SSD Tool Box is a software that gives users an overview of the SSD Status and various aspects such as model name, FW version, health condition and sensor temperature
  • he data in memory chips distinguished by totally silent operation, low temperature and electricity consumption. All these features permit to feel the essential difference from the currently obsolete technology of hard discs.

 

Overview:

  • Interface: Boost: PCIe 3.0x4, NVMe 1.3
  • Total Capacity: 1TB
  • External DDR Cache: DDR3L 2Gb
  • Power Consumption (Idle): L0/L0s/L1: 900mw
    L1.2 < 3mw

 

Manufacturer Warranty: 05 Years Limited Warranty

 

Technical Specifications

General

Storage Capacity Storage capacity refers to how much disk space storage devices provides.
1 TB
Storage Type
SSD
Read Speed Read speed is a measurement of the performance on storage devices.
Up to 3500 MB/s
Write Speed Write speed is a measurement of the performance on storage devices.
Up to 3000 MB/s
Interface Hard disk drives are accessed over one of a number of bus types, including parallel ATA, Serial ATA (SATA), SCSI, Serial Attached SCSI, and Fibre Channel.
PCIe 3.0x4, NVMe 1.3
Form Factor
M.2 2280
NAND NAND is a type of flash memory that reduces erase and write times lower than hard drive, and requires less chip area per cell, which allows for more storage density and lower cost.
3D TLC NAND Flash
Dimensions (H x W x D)
2.3 x 80 x 22
Weight
10g
Advanced Features
Random Read IOPS: up to 308K
Random Write IOPS: up to 332K
Mean time between failure (MTBF): 2M hours
Power Consumption (Active): Average: R: 5.9W, W:5W
Power Consumption (Idle): L0/L0s/L1: 900mw
L1.2 < 3mw
Temperature (Operating): 0°C to 70°C
Temperature (Storage): -40°C to 85°C

Product Review

 

Customers Also Viewed These

Customers Also Bought These

Free shipping on half the catalog items

Fast Shipping

Fast Shipping on all stocked items

24/7 Support

Secure payment with no Surcharge

Payment

Secure payment with no Surcharge

We carry all leading trusted brands

Trusted brands

We carry all leading trusted brands

Experienced staff with technical know

Experienced and Reliable

Experienced staff with Technical Knowledge

All our stock is locally sourced with local warranties

Australian Stock

All our stock is locally sourced with local warranties

Item Added to Cart Successfully

$

Items

View Cart
Home Home Brands Brands Cart 0 Cart Dashboard Account