TP-Link 54M 2.4GHz High Power Wireless Outdoor CPE
The TL-WA5210G 2.4GHz High Power Wireless Outdoor CPE is dedicated to WISP CPE solution and long distance wireless network solutions. It integrates the functions of a Wireless Access Point
WISP Client
high gain antenna and weatherproof enclosure. It features 12dBi high gain antenna
high output power and high RX sensitivity can significantly extend the transmission range to deliver a more stable wireless connection.
The TL-WA5210G features high output power and high RX sensitivity can significantly extend the transmission range to reduce dead spots and to deliver a more stable wireless connection. With integrated 12dBi dual-polarized antenna
the TL-WA5210G would help you easy to build up to 15km long range wireless link. If you have higher gain antenna
it also supports distance control from 0km to 52.6km
which breaks through distance limitations in normal 802.11g devices
enables ultra-long distance wireless transmission.
The TL-WA5210G provides three operation modes for multiple users to access the Internet: AP client router
AP router and AP. In AP client router mode
it works as a WISP CPE. In AP router mode
it can access the Internet via an ADSL/Cable Modem. In AP mode it can work in various modes
such as Access Point/Client/WDS Bridge/Repeater. With the most attentive wireless security
the TL-WA5210G provides wireless LAN 64/128bit WEP encryption security
and WPA/WPA2 and WPA-PSK/WPA2-PSK authentication
as well as TKIP/AES encryption security.
The TL-WA5210G is easy-to-manage. Quick Setup is supported and friendly help messages are provided for every step. So you can configure it conveniently and share the Internet more quickly and easily.
-
High output transmission power and reception sensitivity optimized
-
12dBi directional antennas fit for various environments and boost your signal level
-
Weatherproof enclosure and lightning protection terminal integrated
-
Supports WISP Mode
-
Supports Passive Power over Ethernet
-
Support 15kV ESD Protection
-
Supports AP Client Router
AP Router and AP operation mode
-
Distance Adjustment for long range transmission
up to 50km
-
Supports Antenna Alignment
-
Supports Layer 2 User Isolation
-
Provides throughput monitor indicating the current wireless throughput.
-
Supports Ping Watch Dog
-
Supports Wireless Speed Test
-
Supports Remote Management.
-
Provides WEP
WPA/WPA2
WPA-PSK/WPA2-PSK data security
-
Provides external RP-SMA connector for higher gain antenna upgrade
| Software Specification |
| Standards | IEEE 802.11g
IEEE 802.11b |
| Wireless Signal Rates With Automatic Fallback | 11g: 54/48/36/24/18/12/9/6M(dynamic) 11b: 11/5.5/2/1M(dynamic) |
| Frequency Range | 2.4-2.4835GHz |
| Wireless Transmit Power* | <20dBm (EIRP
For countries using CE Standards) <27Bm (Peak Output Power
For countries using FCC Standards) |
| Modulation Technology | IEEE 802.11b: DQPSK
DBPSK
DSSS
and CCK IEEE 802.11g: BPSK
QPSK
16QAM
64QAM
OFDM |
| Receiver Sensitivity | 802.11g 54M: -76dBm 48M: -78dBm 36M: -82dBm 12M: -91dBm 9M:-92dBm 802.11b 11M:-90dBm 5.5M:-92dBm 1M:-98dBm |
| Wireless Mode | AP Router Mode AP Client Router Mode (WISP Clent) AP/Client/WDS Bridge/Repeater mode |
| Wireless Range | 15km with Integrated Antenna 50km Maximum (High gain directional antenna required) |
| Wireless Security | SSID Enable/Disable MAC Address Filter 64/128/152-bit WEP Encryption WPA/WPA2/WPA-PSK/WPA2-PSK (AES/TKIP) Encryption |
| Hardware Specification |
| Interface | One 10/100M Auto-Sensing RJ45 Port(Auto MDI/MDIX
PoE) One external Reverse SMA Connector One Grounding Terminal |
| Antenna | 12dBi Dual-Polarized Directional Antenna |
| Antenna Beamwidth | Horizontal: 60° Vertical: 30° |
| Power Supply Unit | Input: Localized to Country of Sale Output: 12VDC / 1.0A Linear PSU |
| Operating Temperature | -30°C~70°C (-22?~158?) |
| Relative Humidity | 10% ~ 90%
Non Condensation |
| Storage Humidity | 5%~95% Non-Condensing |
| Dimensions | 10.4 × 4.7 × 3.2 in. (265x120x83mm) |
